Heute ist der offizielle Verkaufsstart des neuen Boards von Loaded. Das Icarus!!
Dieses Board setzt in Sachen Dropthrough Boards beim Thema Vielseitigkeit und Konstruktion neue Maßstäbe.
Es ist das erste flexible Dropthrough Board mit Wheelflares. Das gibt Platz für riesige Rollen (bis 80mm), ermöglicht einen “eingelockten” Stand auf dem Brett, bietet Torsionssteifigkeit und bleibt dabei trotzdem schön flexig beim chilligen Cruisen von A nach B.
Hier die Specs und die Beschreibung zum neuen Icarus von Loaded selber:
The shape of the Icarus echoes the elegantly utilitarian outline popularized by the Dervish and Tan Tien. Its mid-sized length and wheelbase strike a balance between stability and maneuverability, accommodating a (slightly-wider-than-) shoulder-width stance for most riders. Straight rails along the standing platform ensure torsional stability, while full-figured cutouts at the tips allow for deep turns without wheelbite.
The cambered profile pairs with the bamboo core and epoxy/fiberglass skins (as well as the concaves and wheel flares) to create an active suspension with ungodly energy return. Pump away!
WHEEL WELL FLARES
Flared wheel wells do three things for the Icarus:
• Increase wheel clearance, allowing for larger wheels
• Stiffen the necks, creating more direct energy transfer to the trucks
• Create an ergonomic lock, letting you know where you are by feel and giving you strong leverage points to push against
Because the flares stiffen the necks we needed to create a variable concave to balance out the flex pattern. Tighter concave in the center of the board prevents the deck from folding at the center, while more subtle concave underfoot near the flares locks you in and feels yummy. This was inspired by the flex patterning explored for our snowboard, the Algernon.
NOSE & TAIL KICKS
Minimal nose and tail kicks allow for enhanced maneuverability in tight quarters while also opening the door to exploring freestyle trickery. The kicks are reinforced with an additional layer of fiberglass for added stiffness and durability.
Flex 1: 170-250+lbs / 75-115+kg
Flex 2: 75-200+lbs / 35-90+kg
A softer flex gives you more control and tighter turns at slower speeds and makes it easier to slide, but it tends to lose stability slightly at higher speeds. Stiffer flex means more energy potential, more stability at higher speeds, and greater durability under hard freestyle riding, but it will not be as forgiving and lively when cruising. As always, our flex ratings are recommendations. Try ‘em out and see what suits you.
We recommend 180mm or 10″ trucks (Paris, Bear, Gullwing Charger, etc.) for the Icarus.
When setting up trucks we recommend using a 1/16″ shock pad between the baseplate and the deck as well as washers between the nuts and the deck.
With proper setup (larger bushings), the Icarus is designed to accommodate 80mm wheels without wheelbite. Our go-to setup is the Orangatang Kegels with Paris and soft (orange) Nipple bushings with a flat washer on the board side and a large cupped washer (the ones that come standard on the Paris 180s) on the road side.
A wider race-style wheel is ideal for maintaining roll speed and traction through hard carves, pumping, and long-distance pushing. A 70-75mm freeride wheel will provide a well-rounded balance of grip and drift for a more slide-friendly riding style.
Riders leaning towards freestyle and aggressive freeriding may prefer a smaller, lighter wheel in the 65-70mm+ range.
NAME & GRAPHICS
Drawing from Greek Mythology, this board takes its name from Icarus, whose master-craftsman father Daedalus built the Labyrinth for King Minos to imprison the Minotaur. After Daedalus himself was imprisoned by Minos, he created two pairs of wax and feather wings for himself and Icarus to use in escaping the island of Crete. Despite his father’s warning to follow his flight path, Icarus found himself captivated by the thrill of flight and ascended too high into the sky. The sun’s heat melted the wax in his wings, causing him to fall into the sea.
Moral of the story? Get better wings.
Epoxy and triaxial fiberglass sandwich a 5-part vertically laminated bamboo core, pressed into concave and convex cambers for liveliness, responsiveness and high energy potential. Drop-through cutouts are CNC milled for precision.
Biscuits and Gravy: To achieve the dramatic wheel well contours without cracking the core, we developed “biscuit” inserts. We machine out the cores in areas of extreme curvature (where the wild wheel flares are) and drop in four separate bamboo “biscuits” in order to mitigate the stresses. The “five” resulting cores are bonded together using our proprietary, high performance epoxy and sandwiched between triaxial glass skins to create this curvaceous beast.
An extra layer of fiberglass is applied on the nose and tail for additional rigidity in the kicks.